> Product Introduction > Soluble Cutting Fluid
Cutting oils reduce erosion and abrasion between tool and material during metal machining, and also enhances tool life, improves surface roughness and machining accuracy. Different cutting oils are chosen depending on equipment, machining process and material condition. Cutting oils are largely divided into either soluble or neat types according to their composition and method of use. Soluble products are once again divided into Emulsion, Semi and Synthetic types, while neat products are divided according to content and type of extreme pressure additives.
Product Name | Typical Data | Application | |||||||||
pH | Factor | Chip Rust (3%, 24hr) |
Lubricity (3%, 24hr) |
Soft Water | Hard Water < 450ppm |
Steel Alloys | Aluminum | Copper / Zinc Alloys |
Ti / Stain less Steel |
Machine Cleanness |
|
SHL SAMSOL E1 |
10.0 | 1.23 | No Rust | ![]() |
![]() |
![]() |
![]() |
– | ![]() |
– | ![]() |
SHL SAMSOL EF 150H |
10.0 | 1.15 | No Rust | ![]() |
![]() |
– | ![]() |
– | – | – | ![]() |
SHL SAMSOL 3000L |
9.7 | 1.20 | No Rust | ![]() |
![]() |
![]() |
![]() |
![]() |
– | – | ![]() |
SHL SAMSOL F17H |
9.8 | 1.15 | No Rust | ![]() |
![]() |
– | ![]() |
conditional | – | – | ![]() |
SHL SAMSOL F1 |
9.8 | 1.10 | No Rust | ![]() |
![]() |
– | ![]() |
conditional | – | ![]() |
![]() |
SHL SAMSOL A1 |
9.4 | 1.15 | No Rust | ![]() |
![]() |
![]() |
![]() |
![]() |
– | – | ![]() |
SHL SAMSOL A7H |
9.3 | 1.15 | No Rust | ![]() |
![]() |
– | ![]() |
![]() |
– | ![]() |
![]() |
SHL SAMSOL 3000H |
9.7 | 1.19 | No Rust | ![]() |
![]() |
![]() |
![]() |
(Mg가능) | – | – | ![]() |
SHL SAMSOL EM 570K |
9.6 | 1.15 | No Rust | ![]() |
![]() |
– | ![]() |
![]() |
![]() |
![]() |
![]() |
Product Name | Typical Data | Application | |||||||||
pH | Factor | Chip Rust (3%, 24hr) |
Lubricity (3%, 24hr) |
Soft Water | Hard Water < 450ppm |
Steel Alloys | Aluminum | Copper / Zinc Alloys |
Ti / Stain less Steel |
Machine Cleanness |
|
SHL SAMSOL K7A |
9.7 | 1.47 | No Rust | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
– | ![]() |
SHL SAMSOL K7E |
9.9 | 1.65 | No Rust | ![]() |
![]() |
![]() |
![]() |
conditional | – | – | ![]() |
SHL SAMSOL KSV |
9.6 | 1.47 | No Rust | ![]() |
![]() |
![]() |
– | ![]() |
![]() |
– | ![]() |
SHL SAMSOL KF1C |
10.0 | 2.60 | No Rust | ![]() |
![]() |
– | ![]() |
– | – | – | ![]() |
Product Name | Typical Data | Application | ||||||||||
pH | Factor | Chip Rust (3%, 24hr) |
Lubricity (3%, 24hr) |
Soft Water | Hard Water < 450ppm |
Steel Alloys | Aluminum | Copper / Zinc Alloys |
Ti / Stain less Steel |
Machine Cleanness |
||
SHL SAMSOL S9G |
9.6 | 3.15 | No Rust | ![]() |
![]() |
![]() |
![]() |
– | – | – | ![]() |
- Emulsion Type
-
Product Name Typical Data Application pH Factor Chip Rust
(3%, 24hr)Lubricity
(3%, 24hr)Soft Water Hard Water
< 450ppmSteel Alloys Aluminum Copper
/ Zinc
AlloysTi
/ Stain
less SteelMachine
CleannessSHL
SAMSOL
E110.0 1.23 No Rust – – SHL
SAMSOL
EF 150H10.0 1.15 No Rust – – – – SHL
SAMSOL
3000L9.7 1.20 No Rust – – SHL
SAMSOL
F17H9.8 1.15 No Rust – conditional – – SHL
SAMSOL
F19.8 1.10 No Rust – conditional – SHL
SAMSOL
A19.4 1.15 No Rust – – SHL
SAMSOL
A7H9.3 1.15 No Rust – – SHL
SAMSOL
3000H9.7 1.19 No Rust (Mg가능) – – SHL
SAMSOL
EM 570K9.6 1.15 No Rust – - Semi Type
-
Product Name Typical Data Application pH Factor Chip Rust
(3%, 24hr)Lubricity
(3%, 24hr)Soft Water Hard Water
< 450ppmSteel Alloys Aluminum Copper
/ Zinc
AlloysTi
/ Stain
less SteelMachine
CleannessSHL
SAMSOL
K7A9.7 1.47 No Rust – SHL
SAMSOL
K7E9.9 1.65 No Rust conditional – – SHL
SAMSOL
KSV9.6 1.47 No Rust – – SHL
SAMSOL
KF1C10.0 2.60 No Rust – – – – - Synthetic Type
-
Product Name Typical Data Application pH Factor Chip Rust
(3%, 24hr)Lubricity
(3%, 24hr)Soft Water Hard Water
< 450ppmSteel Alloys Aluminum Copper
/ Zinc
AlloysTi
/ Stain
less SteelMachine
CleannessSHL
SAMSOL
S9G9.6 3.15 No Rust – – –